Alexor PC9155D-433 Specifikace stáhnout pdf (Strana 4)

Serial Numbers:

PC9155:

The PC9155 requires that all device/detector are programmed with an 8-digit serial number.

Wireless Devices:

1 – Way Devices: the serial number for these devices are 6-digits in length. Since the PC9155 requires

that serial number are programmed with 8-digits, enter ‘00’ prior to entering the 6-digit number.

2 – Way Devices: these devices are 8-digits

Wireless Supervision

Supervisory Signal:

Each wireless device automatically transmits a supervisory signal every 64 minutes. This signal is

automatic and contains the following information:

Contact State

Tamper State

Battery Voltage

Supervisory Window:

This is a programmable window in the PC9155 control panel (default = 24 hours). It is required that at

least one supervisory signal be received by the PC9155 from each device/detector before the end of

each supervisory window. If a signal is not received, a Zone Fault trouble condition is generated for the

failed device/detector

Wireless Detector Compatibility

1 – Way Detectors:

1-way 433MHz detectors are compatible with the PC9155

2 – Way Detectors:

2-way 433MHz detectors (contain a prefix ‘WT’) are only compatible with the PC9155 and are NOT

compatible with 1-way receivers

List of 1-way receivers:

PC5132-433

RF5132-433

RF5108-433

SCW9045/47

RFK55XX-433

1 2 3 4 5 6 7 8 9 ... 49 50

Žádné komentáře

Alexor PC9155D-433 Specifikace Strana 4